In a world where speed is a phenomenon of ultimate desire, fiber optic networks have become treasured objects of the humanity. The astonishing speed and accuracy in data transfer that these networks provide has made them exceedingly popular for applications that require high volume data transfer at high speeds. In fact, it has reached a class of its own with practically no competition.
Where are such fibers used? These are used in a number of contexts where the following characteristics of communication are desired.
- High speed of transmission – the data travels using optical rather than electrical medium and as a result it travels practically at the speed of light.
- Low attenuation – this enables the data to travel a high distance without any amplification involved in the route.
- High accuracy – this is possible only if low interference levels are allowed from external signals, which would prevent any distortion in the data being transferred.
Clearly, using optical fibers as communication medium improves the process by a significant amount. However, in reality, one can never hope to perform all the communications required using a single piece of wire. That is where a fiber optic patch becomes valuable – it plays fiber optic patch cord supplier a crucial role in connecting cables. When the signal goes from one fiber cable to another, it is essential to ensure that the signal is not distorted, lots or attenuated. The patch cables and patch cords are the right choices to make to create the connection.
What are the essential characteristics to look for when you go for your own fiber optic patch? There are a number of important features that ought to play at the back of your mind while making your selection. Some important ones are listed below.
- Modes: You would want to consider the modes of transmission. Both multimode and single mode transmission patches are available and you would have to understand your requirements before you select the right mode for you.
- Aperture: Not all optical fiber cables are of the same aperture. You would want to know the aperture of the cables that you want your patch to fit into, before you select the patch. Remember that many of the modern components tend to use narrower aperture rather than the conventional wide ones.
- Bandwidth and transmission rate: If specified, take a look at the bandwidth and transmission rate that the fiber optic patch supports. Also make sure that the patch can support the transmission of your data signal to longer distances and suffer lower levels of loss.
- Protocol support: Look at the protocols that the cables support. Some important protocols would be the ATM protocol, Infiniband, Ethernet and Internet Protocol.
Also look at the material of manufacture of the fiber before you buy – get patches of high quality glass or good quality optic cord fiber.